Bently Nevada 330910-00-12-10-02-05 NSv Probe

Sales Manager:

Frida

Phone/Whatsapp:

+86 15359408275

Email:

sales5@mooreplc.com

Address:

3203 Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian,China

330910-00-12-10-02-05 NSv Probe

The 330910-00-12-10-02-05 is a standard mount proximity probe from the 3300 NSv series, designed for use with the 3300 XL NSv Proximity Transducer System. It is intended for machines with tight installation requirements, such as centrifugal air compressors, refrigeration compressors, and process gas compressors where counterbore, side-view, or rear-view restrictions limit the use of standard 5 mm and 8 mm transducer systems.

This probe is ideal for small target applications, including measuring radial vibration on shafts smaller than 51 mm (2 in) or axial position on flat targets smaller than 15 mm (0.6 in). It features enhanced side-view characteristics and increased chemical resistance compared to previous 3300 RAM probes.

330910-00-12-10-02-05 DETAILS

Part Number:330910-00-12-10-02-05
Base Model:330910 - 3300 NSv Probe, M10 x 1 thread, with armor
Unthreaded Length (AA):00: 0 mm
Overall Case Length (BB):12: 120 mm
Total Cable Length (CC):10: 1.0 meter (39 inches)
Connector and Cable Type (DD):02: Miniature coaxial ClickLoc™ connector, standard cable
Agency Approval (EE):05: Multiple Approvals (CSA, ATEX, IECEx)
Thread Type:M10 x 1 metric
Armor:With stainless steel armor
Mounting Style:Standard mount
Linear Range:1.5 mm (60 mils), from approximately 0.25 to 1.75 mm (10 to 70 mils) from target
Recommended Gap Setting:1.0 mm (40 mils)
Average Scale Factor:7.87 V/mm (200 mV/mil)
System Length Compatibility:5 or 7 meters (when combined with extension cable and Proximitor Sensor)
Probe Tip Material:Polyphenylene sulfide (PPS)
Probe Case Material:AISI 304 Stainless Steel
Probe Cable:75 Ω coaxial, FEP insulated, with stainless steel armor
Connector Type:Gold-plated brass ClickLoc™ miniature coaxial
Temperature Range (Operating):-52°C to +177°C (-62°F to +351°F)

330910-00-12-10-02-05

Frequently Asked Questions (FAQ)

Q: What type of thread does this 330910-00-12-10-02-05 probe use?
A: It uses an M10 x 1 metric thread.

Q: Is this 330910-00-12-10-02-05 probe armored?
A: Yes. The base model 330910 is the armored version of the M10 x 1 thread NSv probe.

Q: What does the "-05" agency approval option mean?
A: The "-05" option indicates that this probe carries multiple hazardous area approvals, including CSA for North America, and ATEX and IECEx for international use. It is approved for use in intrinsically safe (ia) and non-incendive (nA/ec) applications.

Q: What is the correct gap setting for this 330910-00-12-10-02-05 probe?
A: The recommended gap setting is 1.0 mm (40 mils). The linear range extends from approximately 0.25 mm to 1.75 mm (10 to 70 mils) from the target.

Q: What is the maximum thread engagement length for the M10 x 1 thread?
A: The maximum recommended thread engagement length is 15 mm . Exceeding this length may cause binding during installation. Bently Nevada does not replace probes under warranty due to excessive thread engagement.

Q: What type of connector does this 330910-00-12-10-02-05 probe use?
A: 330910-00-12-10-02-05 uses a gold-plated brass ClickLoc™ miniature coaxial connector (option "02"). This connector locks into place with a "click" when finger-tight, preventing loosening from vibration.