Non-contact shaft sensing
The NSv probe senses its gap to the conductive target.
330903-00-10-10-02-05 — a Bently Nevada 3300 NSv M8 × 1 proximity probe without armor, configured with a 100 mm case, 1.0 m standard cable and a ClickLoc connector.
Click “+” to expand more specifications.
Bently Nevada Datasheet 147385 identifies the 330903 NSv probe family and its ordering pattern; the public family documents do not certify this complete supplied variant.
Bently Nevada Datasheet 147385 documents the 3300 XL NSv family and the 330903 unarmored M8 × 1 probe. The 00/10 fields correspond to 0 mm unthreaded length and a 100 mm case. 10 specifies 1.0 m total length and 02 a standard-cable ClickLoc connector. 05 indicates multiple approvals in the family ordering table; confirm the supplied unit marking. No public PDF certifies this complete supplied model.
OPEN OFFICIAL SERIES DATASHEET PDFSend the complete model, quantity, and your technical or purchasing question.
Family and ordering information is based on Bently Nevada Datasheet 147385 and Approvals Guide 108M1756; confirm the supplied nameplate and approval marking.
Bently Nevada is the manufacturer. 330903-00-10-10-02-05 is an unarmored M8 × 1 NSv probe. In a correctly selected 3300 XL NSv system, its probe signal passes through an NSv extension cable to a matched Proximitor Sensor for shaft-position and vibration measurement.
The NSv probe senses its gap to the conductive target.
Choose the cable length so probe plus extension cable equals the selected sensor system length.
The matched NSv Proximitor Sensor converts probe-gap changes to an electrical output.
A clear workflow for sourcing, verification, shipment preparation, delivery and product assurance.
Include the complete model, complete suffix, quantity and delivery destination.