The 2094-BSP2 is a 2094 shunt module for compatible 6000, 6200 and 6500 servo-drive systems. It adds 200 W continuous shunt capacity and provides connections for an external shunt resistor and thermal switch.
Click “+” to expand more specifications.
Source: Manufacturer publication KNX-TD005B-EN-P identifies 2094-BSP2 and states 28.75 Ω resistance, 200 W continuous power, 470 µF capacitance and voltage-dependent peak ratings.
2094-BSP2 is documented for compatible 6000, 6200 and 6500 servo-drive families. The manufacturer lists it for both 200 V and 400 V class systems; check the power-rail layout and module clearances.
2094-BSP2 provides 200 W of continuous shunt capacity. The required shunt combination depends on the application and any internal or external resistor, so size the complete drive system against its regeneration duty.
2094-BSP2 is rated 5.7 kW peak and 14 A peak at 230 V, versus 22.5 kW and 28 A at 460 V. These are voltage-dependent ratings for the same 2094 shunt module.
2094-BSP2 provides an RC connector for an external shunt resistor and a TS connector for an external thermal switch. Select and wire external shunt hardware according to the installed drive configuration.
2094-BSP2 has a listed shunt resistance of 28.75 Ω and capacitance of 470 µF. These values appear in the manufacturer's exact-model shunt module technical table and should be used with its voltage-specific ratings.
2094-BSP2 is physically larger than 200 V class drives. The manufacturer calls for extra space below and in front of the shunt module when it is installed in a 200 V class power-rail assembly.
For 2094-BSP2, provide the complete catalog number, quantity, drive family, 200 V or 400 V class, power-rail arrangement and any external resistor or thermal-switch requirement so the shunt arrangement can be reviewed.
Manufacturer technical documentation for 2094-BSP2, a servo drive shunt module.
Manufacturer publication KNX-TD005B-EN-P explicitly identifies 2094-BSP2 and lists its shunt power ratings, connectors, indicators, compatible drive families and mounting considerations.
OPEN OFFICIAL TECHNICAL PDFSend the complete model, quantity, nameplate photos and your technical or purchasing question.
Technical reference: manufacturer publication KNX-TD005B-EN-P, Bulletin 2094 Shunt Module section for the exact 2094-BSP2 catalog number.
The manufacturer identifies 2094-BSP2 as a servo drive shunt module. The 2094-BSP2 is a 2094 shunt module for compatible 6000, 6200 and 6500 servo-drive systems. It adds 200 W continuous shunt capacity and provides connections for an external shunt resistor and thermal switch.
Adds shunt capacity in a compatible servo-drive power-rail assembly.
The RC connector supports an external shunt resistor.
The TS connector accepts the external thermal-switch connection.
The module is specified for both 200 V and 400 V class systems.
Provides 200 W continuous shunt capacity in a compatible servo-drive system.
Its RC connector links the module to an appropriately selected external shunt resistor.
The TS connector supports the external shunt thermal-switch circuit.
Installs in supported 6000, 6200 and 6500 drive assemblies with required clearance.
A clear workflow for sourcing, verification, shipment preparation, delivery and product assurance.
Include the complete part number, quantity and delivery destination.